HueForge Super Mario logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5

Swap Instructions:
Start with Black
At layer #26 (2.16mm) swap to Red
At layer #31 (2.56mm) swap to Azure Blue
At layer #38 (3.12mm) swap to BambuLab Green
At layer #49 (4mm) swap to Savannah Yellow for the rest.