HueForge Luigi waving

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Brown Transmission Distance: 0.5
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyTerra Lava Red Transmission Distance: 1
PLA Sunlu Green Transmission Distance: 6
PLA PolyTerra Pastel Candy Transmission Distance: 2.5
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyLite White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Brown
At layer #23 (1.92mm) swap to Sapphire Blue
At layer #25 (2.08mm) swap to Lava Red
At layer #40 (3.28mm) swap to Green
At layer #55 (4.48mm) swap to Pastel Candy
At layer #64 (5.2mm) swap to Pastel Peach
At layer #65 (5.28mm) swap to White for the rest.