HueForge Bomb Boo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Magenta Transmission Distance: 1
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Forest Green Transmission Distance: 0.5

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Magenta
At layer #33 (2.72mm) swap to Savannah Yellow
At layer #54 (4.4mm) swap to Forest Green for the rest.