HueForge Blooper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Ash Gray
At layer #46 (3.76mm) swap to White
At layer #57 (4.64mm) swap to Sapphire Blue
At layer #58 (4.72mm) swap to White for the rest.