FrSky X20S Gimbal Protector

I think these will fit the x20 (non S model) or the new X20 Pro as well. Let me know if they don't. This model prints upside down and does not require any supports, although I did find I got more reliable adhesion when I printed with a brim since the contact area is pretty thin. 

I printed this on a Bambu Lab X1C & AMS with the following settings:

• Bambu PLA-CF matcha and black filaments 
• For the logo version assign the logo file a new color in the objects tab 
• High temp plate
• 0.12 layer height
• 3 wall loops
• 15% gyroid infill
• No supports
• 5mm outer brim only - 1 layer

To print the version with the logo, download the two .stls in the “With Logo” folder. Make sure you bring them into your slicer together so everything stays aligned.

It fits my TX perfectly, but you may need to scale it slightly to fit yours. I had to make measurements and design it from scratch since I could not find a spec sheet or mechanical drawing of the TX.

Have fun! And post your make if you want.