Infrared Thermometer Gun Pegboard Mount

This is a pegboard mount for my infrared temperature gun.

I wanted a pegboard mount that didn't take up too much space and that looked nice, which seemed tricky for the temperature gun design, so I came up with this and am quite pleased with it.

My exact model is called the Nubee NUB8550H, which doesn't look to be for sale on Amazon anymore. But seems to be a very generic model that is sold though many manufacturers using the same molds, for instance this one. See the identical plastic markings, like the forward arrows on the side.

I made the model in Fusion 360 by tracing some photos and taking some measurements with my digital calipers. You can download the Fusion 360 file here.

The pegboard attachment mechanism is printed separately and can be glued together with CA glue. My first try on that part was not a perfect fit, but I made some adjustments and re-printed, and didn't glue them together until I was happy with the fit. I found that printing that vertically, with the pegboard pins coming up made for a stronger attachment to the pegboard, and I can pull the gun out of the holder without the holder coming off the pegboard, which I initially couldn't do and had to hold it in as I removed the thermometer.

I also have a post on my website discussing the design.

You can see how it fits here:

These parts are printed with Prusament Galaxy Black PLA.

Here is my Anemometer Mount too.

The peg design is from Make Anything, as shown in this video.