You will need 2 M2x15mm screws for the e3d v6 hotend and you must drill to 3mm the old little fan screw holes for pass thru with the m3 screws.
wenn you are using the fan duckt you have to lower the fan speed to about 8% and leave it completely off for the first layers
Printer:
K8400
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
20
finish
Sanded and painted
Category: 3D Printer Parts
The author marked this model as their own original creation. Imported from Thingiverse.