Filament Spool Shell V3.2 (Adapter) Universal, stackable, for Bambu Lab AMS

This shell will fit on any Filament spool to make it fit the AMS

It will fit any spool with at least a 53mm inner hole and a Spool width of 31-60mm (it works for me with 68mm but it does not fit the AMS Spec)

This Version is good if you want to print 4 sets in one shot (2 plates, One for the wheels, and one for the Hubs) I posted the individual STL & STEP files but also the 3MF is ready for printing 4 sets in PLA with PETG as a differentiator between the 8 wheels (so you can set it for printing and go) 
Remark: the 8 wheels on to of each other (8 wheels 3MF file) must to be in 100% Infill  

Remark: you need 2 Wheels for each Set and 1 of each Hub M+F 

if you want to print only one spool shell you can find in on V2
https://www.printables.com/model/585107-filament-spool-shell-v2-adapter-universal-for-bamb

It was made to be connected to the original spool the filament came with and not as an independent spool!

Update the Spool_F-side_V3.2_Hub to V2.3, add an extra release on the thread to reduce the friction force