Kallax/Dröna swappable box label

This is a clean, swappable label for Dröna/kallax boxes (but should work for anything with a 4mm lip)

Can be printed upright with no supports.

Use the text feature in prusaslicer/bambu studio (and possibly others, I haven't checked). To add text to the blank label (inside the border).

If you want to do fancy mult-material printing, the blank label is 3mm high, so anything above that should be text.

I created this to replace traditional sticky labels (that you can still see in the photos) as they were difficult to read from a distance, and people kept putting boxes back in the wrong slot.

If you don't want to bother with the label itself, a piece of paper/card 55x39mm would also work. (rought 2" x 1.5" I believe)