Caravan/Motorhome Waste Bin Repair Part

Repair part for the popular Hartal waste bins fitted to caravans, motorhomes and camper vans. My waste bin broke after only months of use, rather than buy a new bin which would probably break again I decided to design and print this repair part. Attached photographs should explain all, I fitted this part 5 years ago and is still performing with no issues. The part is intended to be push fit onto the legs of the frame. My print came out fine and was able to push fit onto the frame legs, no filing of the holes or glue was required. Depending on accuracy of your printer filing of the holes or glue may be required. The part was printed in PETG with supports, 4 perimeters and 40% infill.