SecKit Cube CPAP Part Cooler

You'll want to:

• Use ABS filament or a filament that can be glued.

-Use 15mm CPAP hose.

-The CPAP hose is modeled in Fusion 360 as a CCW Coil with 6mm Pitch, 17.1mm Diameter, and a 2.5mm section size. This lets you screw the hose into the fitting and replace it if needed.

• Convert the Bondtech/Bondtech Clone extruder to use M4 studs for the part cooler mount, but honestly you may want to just use a different cooler mine uses a custom-made brass nozzle from brass tubing...