XT60-H Panel Mount

A quick, dirty, simple model to house both the male and female side of the XT60H Plug type, it MAY be compatible with others, it's tolerances are TIGHT (pending your printer), I HIGHLY recommend glue/epoxy. 

Print settings (test and fit)

Filament: Sunlu PETG @ 245/80

Layer Height: 0.2, 0.15, 0.12, 0.08

First Layer 0.2

Wall Count: 3

Top Layers: 3-5

Bottom Layers 3-5

Infill: Basically Irrelevent

Inspiration for this model draws heavily from this model by Fuzzbox. 
https://www.printables.com/model/82137-xt60-panel-mount

Model was designed from the ground up, However, inspiration came from THIS model, so I must give credit where credit is due. Model didn't fit my needs.