I've always wanted to design a godzilla, well ... that's how it turned out. = D
Print Settings
- Material: Spectrum - Emerald Green Pla
- Nozzle: 0.4mm
- Layerheight: 0.15mm
- Supports: Everywhere
- Paint-on supports: On both sides of the zilla, it is worth painting extra support at the bottom.
- For a nicer top surface: Change the Lift Z to 0.1
- Top fill pattern: Concentric
Post Process
Scalpel can be used to easily remove any support residue left on it.
Tags
The author marked this model as their own original creation.