Voron 0.2r1 Wide/Extended Feet - Stock skirts (UPDATE)

UPDATE - 29 September 2023:

I've uploaded version 1.1 of the designs, all parts have some changes for easier printing. This means that all feet have build in print supports at the bottom. Also the rear left feet is now split into 2 parts: The feet and the inlet. Because of this you can print it now without additional supports but does require additional hardware to mount the inlet to the feet:

v1.1 BOM:

• 2x Heat insert M3x5x4
• 2x M3x6 BHCS

I highly recommend printing v1.1 over v1.0 for saving yourself fighting a bunch of supports.

**********************************************************************************************

For usage with the Voron 0.2 to fit the v2.2 compressed feet. I've included all stock options, but also the rear corner feet without the PTFE entrance (when using URBI for example) and the Main Inlet fix for the LDO kit. You'll still be able to mount a bottom plate with this mod and all standard skirt mods should fit since it's modeled after the Voron stock feet. M5 thread included in the design for the compressed feet.

For v1.0 Print with support for all pieces except the accent part.

Build from scratch to fit the stock skirts, heavily based on the design by Smolboi