4x4 Membrane Keypad

This is a keypad case I used to hold my 4x4 Membrane Keypad. It snaps together requiring no glue and you can insert a stencil over the switch to change the key allocations. I built it for DIY and prototyping projects. It also supports some Inventr.io projects.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3 MMU 2

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

25%

Filament: Prusa PLA Black

Notes:

This project uses bridges during printing so make sure that you can print bridges successfully. I route breadboard jumpers from the connector thru a hole in the back before snapping it together. This allows for longer cables since t he cable on the membrane switch is fragile.