Apex Legends Caustic Grenade

Description

An Apex Legends Gas Grenade from Caustic. It has a lock system to lock the Grenade when its open. You can add magnets for an better feeling. I used 5x1 mm magnets. The magnets are Not necessary. You need 4 M3 Screws and nuts. I upload the step file if you want to change something. If there are any questions ask me in the comments.

Slicer Settings 

Top_part1:

For the Top part you need to insert 3 M3 nuts. Make a filament change and insert the nuts, load the same filament and print further on.

Material: 

All common Materials can be used.

Assembly Instructions

Insert the grid insert into the top part. Screw the top_part 2 onto the Top_part 1 with 3 M3 Hex screws. Then Glue in the Magnets (if desired) in the Top_part2 and the base. Glue the base and the Grid insert together.