DynaFlange
Parametric flange with a threaded nut in the center and a configurable number of screw holes.
0
13
0
151
updated September 16, 2023
Description
PDFThis model has been developed in OpenSCAD and is using https://github.com/adrianschlatter/threadlib
Following parameters are available for customising a flange:
| parameter | description | default | type / unit |
| threadType | thread type | M12 | string |
| nutWall | wall around thread | 2 | mm |
| flangeDiameter | total diameter | 50 | mm |
| flangeHeight | height of flange plate | 5 | mm |
| height | total height of flange incl. nut | 20 | mm |
| holes | number of screw holes | 3 | integer |
| holeDiameter | diameter of screw holes | 5 | mm |
| taperRadius | radius for taper around nut | 5 | mm |
| higbee_arc | thread start and end | 50 | integer |
Posting your makes and your feedback is highly valued.
Tags
Model origin
The author marked this model as their own original creation.
