Bracket for Phone Holder for Toyota Highlander 2022

For 2022 Toyota Highlander.  This is a bracket that snaps into the lower vent cut-out to attach a phone holder such as an adhesive-backed magnetic holder.  It extends downward enough to sit against leather trim for greater stability.  Excess charging cable can be folded and inserted into the hollow square bottom end. To prevent any scratches, I added thin strips of adhesive-backed, low durometer foam weather stripping (approx 1/8" thick) where it contacts the shiny black plastic of the dash/cockpit trim.  To remove bracket carefully rotate the bracket counter/clockwise.  

I printed with ABS to help with heat resistance.  I was tempted to print forward face down, but learned that it needs to print on edge so layers are are not parallel to the force vectors to prevent the clip-in extensions from snapping off.  This orientation needs obviously need supports for the clip-in extensions.