Flsun v400 Better Cooling

wanted to do this for a long time.

i added a blower fan exclusively for the motor drivers and used the original fan for the rest of the motherboard.

printed with eSUN PLA+ (yep i know pink :-)
the blower is connected via snap-ins.
the original fan is connected via screws (can be connected via several types)

print setup:

• no support needed
• 2 walls
• 0.2 layer

non printed parts:

• the blower fan of course 5015 24v
• 2x M3 20mm screw (for original fan - you can use other types)
• 2x M3 nuts (for original fan - you can use other types)
• 2x M3 8mm screw (to replace the original mount screws)
• really optional - i created 2 sockets for the 2 fans and 1 cord to the motherboard - you can fuse them together to the same socket or do what i did

results:

• cooling - in stall mode 
  • without cooling 43C
  • with cooling 30C
• noise really depends on the fan that you will use. i didn't had an noticeable increase in noise

happy printing