Logitech X55/56 - Ikea Poang Mount - Remix little more spred

A modification to the Sawyer42 - model. It makes a more wide placement for joysticks. It can be changed, by “shrinking” the middle bar. 

Here it has 200 mm, 5cm form either side is used to be placed inside on chair arm brackets.   

With this modification, you have to use nuts and bolts. 

For ONE side you need:

Joystick mount (If you are able to find I would recommend black color):
- 4x M4 60mm bolts
- 4x M4 nuts
- 4x M4 washers

“Undercarage”
- 8x M5 20mm bolts
- 8x M5 20mm nuts

This is designed to be able to use a bracket for M5 screw.

CAUTION: The tops of the bracket may be sharp, please sand down, blunt them, or be careful when sitting. 

 

Printer Brand:
Prusa

Printer: 
Prusa MK4

Rafts:
No

Supports: 
Yes - depending on the model and placement.

Resolution:
.2

Infill: 
25% -brackets and mounts, 75% - Middle bar

Chair, Vr Headset, joysticks, bolts, springs, nuts - not included
 

I've changed how to mount the joysticks to the chair, to be more separate from the chair arm, and remade brackets to be easier to install.