White Wolf - Hueforge Print

White Wolf - Hueforge Print

Amazing print, the texture of the fur really impressed me with this one!

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm. 

I used a 0.4 nozzle for this, and it was flawless, though I have spent a lot of time calibrating the printer and my filaments for this. 

Filaments Used:

• PLA Siddament Black Transmission Distance: 0.2
• PLA Sunlu Beige Transmission Distance: 10
• PLA Overture Light Grey Transmission Distance: 2
• PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

• Start with Black
• At layer #19 (0.88mm) swap to Beige
• At layer #26 (1.16mm) swap to Light Grey
• At layer #28 (1.24mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

Category: Other