Mihawk's Yoru from One Piece

One of many versions of Mihawk's sword Yoru from the manga and anime One Piece
64
345
5
2350
updated September 15, 2023

Description

PDF

Mihawk's legendary sword Yoru from the One Piece manga and anime. This massive sword is over Mihawk's head when sheathed with Mihawk himself standing at 198 cm (78 inches or 6'6") so this model was scaled to be 213 cm (84" or 7') when fully assembled. If you want it to be closer to 244cm (96" or 8') or 274 cm (108" or 9'), like it very likely could be in the anime/manga, I'd recommend scaling parts up from 100% to 114.29% or 128.57%, respectively. 

This model has NOT yet been tested so if you notice anything buggy (not the clown) post it in the comments and I can see if I can fix it or at the very least a comment will help others avoid the same mistakes. 

I've put dovetails on all the pieces to assist with assembly and structural integrity so you're not trying to hold flat pieces together while fixing them together at weak layer lines.

I cut everything to be able to print on an Ender 3 vertically with a bit of room to spare, but if you have a larger bed I recommend orienting the blade parts flat on the bed for more structure so the sword's weight isn't wholly reliant on layer line adhesion. 

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

I made the whole thing printable (that may not sound like a lot, but most things were floating half a millimeter away and moving everything was tedious), cut the blade, guard, and handle up to be printable on an Ender 3 sized bed, and added fishtails to make assembly a bit easier. 

License