Socket frames for Philipps Hue dimmer switch V1

Replacement of standard Jung AS500 socket frames to use the Philipps Hue dimmer switch V1. I made three versions for single, double and triple frames.

The versions for double and triple frames are designed for a plug in the lower hole and one or two switches in the upper part. Therefore the edge in the lower hole is higher to fit the plug properly.

I made two single versions, one for using with a switch and one for using with a plug (if someone really needs this).

Printed with supports from build plate only.

The base for attaching the dimmer switch was taken from the model Philips_Hue_Dimmer_base of stevenverpoest on Thingiverse (https://www.thingiverse.com/thing:2128122).