3D-Printed R2-D2 Data Panel Servo Mount System

This is a Servo mount System for the Version 2 Mr. Baddeley 3-D printed R2-D2. I use a brass rod with file-flattened ends. This Rod passes through a copper tube that acts as a nice bearing.

If you need to replace the servo, or you have already built the droid and want to add the servo, see this project https://www.thingiverse.com/thing:3292846.

Print Settings

Printer Brand:

LulzBot

Printer:

TAZ 6

Resolution:

.2

Infill:

4 perimeters/10%

Notes:

Print slowly because the details are very small. I printed the lower door arm and servo arm pieces on their sides.