The Big Boy - ITX PC CASE

I have a full build video on YouTube showing the entire build process from start to finish, as well as some tests. Check it out here:

PC Components used in this build:

• Intel Core i9 10900k CPU 
• ASUS ROG B460i LGA 1200 ITX motherboard 
• Gigabyte 3070 Gaming OC
• NZXT z53 240mm AIO liquid cooler - 
• Kingston A2000 250GB + 1TB m.2 SSD.
• Corsair 300mm PCIe riser cable.
• CoolerMaster v850 SFX power supply. (850w)

In addition to the printed parts you'll need the following hardware:

• 12x - M4 machine screws. (length 10-15mm)
• 12x - M4 brass threaded inserts.
• 4x - M5 machine screws + nuts + washers. (min length 40mm) 
• 16x - Computer fan screws. (min. 4 should be black, and are usually included with the fans)
• 4x - Motherboard standoffs and mounting screws.
• 4x - 5x30mm flat head wood screw. (25-40mm length is OK)
• 4x - 8x3mm Neodymium magnets.

Tools required to build this case:

• Philips head screwdriver.
• Soldering iron (or other way of heating up threaded inserts)
• Super glue (or other glue that sticks to plastic)

Don't hesitate to ask if you have any questions and I'll answer them to my best ability, usually I reply fastest in the YouTube comments as I check those regularly, but it's also okay to ask here but it might take longer to get a response.