Wolf in Drip Style - Hueforge Print

Wolf in Drip Style - Hueforge Print

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA+ Overture Dark Blue Transmission Distance: 1.8
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA+ Sunlu Fuschia Transmission Distance: 6.8
• PLA Sunlu Lilac Transmission Distance: 6.6
• PLA eSUN PLA Matte Light Pink Transmission Distance: 2.8
• PLA META Sunlu White Transmission Distance: 9.6

Swap Instructions:

• Start with Dark Blue
• At layer #10 (0.88mm) swap to Teal
• At layer #15 (1.28mm) swap to Fuschia
• At layer #16 (1.36mm) swap to Lilac
• At layer #22 (1.84mm) swap to Light Pink
• At layer #25 (2.08mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

Category: Other