Modified XL Camera Mount

This is a quick update for a Wyze camera vertically and a better fit. When it was loose like the original, my camera would not sit horizontally and sag giving a really obviously tilted view.

After trying to make a fit though, I figured a higher view option might be better so I added a vertical column with a wyze camera mount on the top. I still used the lock as I liked the mechanism - this can be found on the original Printables listing.

I have also uploaded a print plate 3mf file that I used to chop up the vertical column with pins and dovetails - using this method with matching dovetails, you could adjust the column to various heights.  This is probably the one to use for printing as it actually allows you to spin the wyze mount on the pin connector for angulation.

I have attached what it looks like and what the view from my WyzeV3 cam is like.

Tighter fit in the aluminium extrusion slot. Still uses the lock because I really liked the mechanism.

Also has a vertical column with a Wyze V3 mount on top taken from https://www.printables.com/model/119161-ikea-skadis-wyze-cam-bracket