Faltenbalg / boot for Haff & Schneider 3D-Taster

This is a 3D-Printable replacement boot for the Haff & Schneider 3D Taster, part. nr. Haff & Schneider 106000 or Hoffmann 359550

Boot part nr. is Haff & Schneider 105451 or Hoffmann 359512

Designed to be printed out of TPU. Not as ideal as the original part, but better than nothing if you can't get one.
Use some very soft TPU, like Bavaflex TPU Super Soft (65A), go slow, no supports.