Minimalistic Card-sized SD Card Holder

Suggested print settings for the Main Body:

• Layer height 0.2mm.
• Infill 20%.
• Perimeters: 5 (for strength and aesthetic).
• No supports are needed.

Suggested print settings for Micro SD attachment:

• Layer height 0.2mm.
• Infill 15%.
• Brim: Width 2mm.
• Brim Separation Gap: 0.2mm.
• No supports are needed but follow the suggested print orientation for ideal results.

Suggested print settings for Cover - Ace of Spade:

• Layer height 0.2mm.
• Infill 20%.
• Perimeters: 5 (for strength and aesthetic).
• No supports are needed.

Changelog

• 19 Oct 2023: New cover design - Ace of Spade.
• 12 Oct 2023: Introduced an attachment that converts one of the SD card slots into a holder for 4 Micro SD cards.

If you appreciate our designs, you can explore more of our gadgets HERE.

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.