HSW Organizer/Winder For Heat Shrink

Compact Heat Shrink Spool

Allows heat shrink to be neatly sorted ready for use, just pull out and snip.

20mm slot allows most sizes to be loaded.

you can get up to 4 meters loaded if your carful, (this will massively depend on size & thickness)

All parts are printable without support and simply snaps together, see photos on how to load the spool.

The body attaches using a M3 x 10mm cap head (use ‘’insert-with-M3'' to attach to the honeycomb wall system)

(can be mounted to anything using 1 x m3 screw)

Printed in PLA+ 3 top, 3 bottom 3 wall @ 0.2mm height.

make sure your printer is within 0.25mm dimensional accuracy!