Wanted to create a way to make wheel sets for HO railway cars.
Two parts wheels and axle, easiest to print separately.
I recommend doing 4 axles at the same time, works best with my Prusa.
To get them glued in all the right angles, print the Jig and use for the assembly.
Assembly:
1.Put one wheel in each half of the jig.
2. Add glue in the holes of the wheels, just a tiny bit.
3.Put the axle in each wheel hole, then push the jig together.
4.Let it dry and then remove, carefully.
The author marked this model as their own original creation.