6in to 3in Duct Reducer for AC Infinity Cloudline S6 - xTool D1Pro Enclosure Exhaust
Reduces diameter of AC Infinity Cloudline S6 6in inlet to 3in for exhausting xTool D1 Pro enclosure.
19
253
0
870
updated September 10, 2023
Description
PDFCredit to @Jonathanlin for including the f3d file that made this an easy first remix!
I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated.
I also included to f3d file if you need to modify any parameters further.
Prints as is without supports, 3 perimeters makes it solid.
PETG recommended, 203g.
MK3S+ 0.6 nozzle at 0.2 layer height with default speeds the print was 8h50m and turned out great.
Tags
Model origin
The author remixed this model.
8in to 6in Duct Reducer for 8 in AC Infinity Cloudline S8
Original model was switched to draft or deleted
Differences of the remix compared to the original
- Changed diameter from 7.8in to 5.75in for fit the Cloudline S6 snugly.
- Changed diameter from 5.8in to 2.9in for fit the 3in intake hose for xTool D1Pro Enclosure exhaust.
- Changed length of lip on the 5.75 in side from 1.25in to 1.5in to fit further on the Cloudline S6.