48 SMD LED Panel Case for Tripod Mount

Case made to hold the typical 48 SMD LED panels you find all over Amazon & Ebay that have all of the funky car dome light connectors. I would probably recommend when wiring the panel to possibly utilize a resistor to knock down the brightness & the temperature. A potentiometer even.

UPDATE: As for utilizing a resistor, sweet spot seems to be between 30Ω & 40Ω. The LED doesn't get hot at all, slightly warm to the touch after 15 minutes of use. 40Ω and higher, the LED stays cool & still puts off decent light if you keep the LED closer to the bed.

Print Settings

Printer:

Prusa i3 MK2

Rafts:

Doesn't Matter

Doesn't Matter

Resolution:

.2

20%

Notes:

If your printer can do 60mm bridges, then you probably do not need to use supports.