The author remixed this model.
This latest Flipper Zero case brings together all the accessories you need to take with you in one space.
I performed the remix of the great @Whity to be able to occupy in the smallest possible volume everything needed to use Flipper Zero.
I made an opening near the USB-C port so that you can charge the device wherever you want, discreetly.
I have added the Fusion360 source to the 3D models so you can modify it if, like me, you have the CC1101 module and want to adapt it to your measurements.
Also the devboard case is by @fivesixzero:
https://www.printables.com/it/model/179910-case-for-flipper-zero-wi-fi-module-v1/files
while the Flipper Zero case is:
https://www.printables.com/it/model/272676-soft-tpu-flipper-zero-cover
The container is printed in PLA, in my case it was made with a 0.6mm nozzle with a 0.4mm layer
The cable holder has been printed in TPU to fit both the cable and the Devboard
For the latches and the hinge, the following screws and nuts were used:
N° 6 M3x40 screws
N° 6 M3 nuts