M.2 SSD 2230 to 2242

Needs an M2x3 or M2x4 screw for attaching the SSD to the computer.

Filament -> Cooling -> min print speed probably needs to be set to 3 or there will probably be defects on your printed part.

Things will probably get pretty toasty in the computer case. Print in PETG or better for heat resilience.

Edit 2025-05-24:
Added a version that prints with less material covering the SSD's chip and thus the SSD shall run slightly less hot. Haven't tried that model out yet so please post a make telling the good, the bad and the ugly.

Fits the 2242 slot instead of the 2280 slot.