Bolt-on Grips for GPD Win Max 2

This is a mod to allow a bar to go across and hold the grips firmly.

Includes:

• Socket for a bar to go into*
• Extra lip by the Keyboard to hold the GPD a little better.
• Holes for M3 Socket head screws

* the bar should in theory only be 2-3mm high, except where it is inside the grip it can be 6mm to allow for M3 screws and possibly brass inserts.  Bar will be made later once I can print this and check the dimensions.

Other options: 

• Make the bar of metal and tap it.  
• Make the bar break in 2 pieces and clip together in the middle somehow.  
• Use All-thread or a coupling nut to join the two grips (protect the finish with softer sleeve over the threads)
• Use some small zip-tie “nylon wire tie”

Printing:

• Print nose down
• Use a Raft, its a tall model.
• Use support (48 Degrees slope)
• Only one is provided, mirror it to get the other side.

• Socket for a support bar to go into.
• Extra lip by the Keyboard to hold the GPD a little better.
• Holes for M3 Socket head screws