The M.O.T.

This is a model that is made for organization. This model contains a fully modular organization solution. The design is almost fully 3d printed. At the bottom and the top you need a bearing.  

The big bearing:

Outer diameter: 47mm

Inner diameter: 19mm

Height: 14mm

The small bearing:

Outer diameter: 22mm

Inner diameter: 8mm

Height: 7mm

You are able to configure it to your onw needs. The attachments are also modular, there are more attachments comming. You can also make your own attachments and print them out. 

This is the assembly instruction that you are going to need. Before you are able to assemble it you need to read the manual. The manual contains some important information that you need to know. 

Here are te dimensions if you want to make your onw attachments. The length is for both 100mm.