Jigsaw Light Box

Light Box
31
59
0
371
updated October 15, 2023

Description

PDF

This light box is designed to be printed on a Bambu Lab Printer with at least 1 AMS unit.

You will get 2 files

  1. The Front Plate - This is where all of the color lives.  Import this file into your bambu studio slicer, lay it flat and then color it just like any other file you would add color to.  Choose the colors of your choice then load the AMS and print!
  2. The Backplate - This is where the LED strip will be added.  I have modeled in a nice 2mm wide channel that will house the LED strip very nicely.  Doing it this way prevents the light from ever coming off or falling down.  Import this file into Bambu studio and lay it on its back.  Slice and print.  When done run the LED strip through the hole in the back and work it around the channel until you have it all covered. Most of the files will only need a 3 foot LED stip.  These are the lights I use

All filaments used will be found here 

 

Tags



Model origin

The author marked this model as their own original creation.

License