AC Wall Plug and Cord Organizer

This model tries to solve the problem of cable managing AC bricks / plugs similarly to how other models solved the issue of storing data cables. At its heart is a center brick capable of holding up to nine AC plugs. You can fit these plugs in either a horizontal or vertical orientation, catering to space, size and personal preferences.

Flanking this central brick are six cord loops. Depending on the length and number of your cables, you can wrap them around a single loop or multiple loops. This ensures that cables, be it long or short, have a dedicated and neat space and don't take turns that are too sharp and might cause damage. All the edges on this model have been rounded off, ensuring our cables are protected from potential damage due to sharp corners.

I printed my organizers in PETG. However any solid filament should work.

Recommended print settings:
Layer height: 0.3mm
Perimeters: 3 (0.4mm nozzle) or 2 (0.6mm nozzle)
Infill: 20% gyroid

However most settings should work just fine.