Stackable Designer Tray Set

Please take time to set up optimal slicing settings in order to get a fast and beautiful print!

Or better yet, feel free to use my .3mf PrusaSlicer preset for your printer.

--------------------------------
Stackable, modular containers that look and function great. Come with an optional lid to hide your contents.

Sizes (LxWxH):

• Full size: 155x104x45 mm
• Half size: 72x104x45 mm (with an option for 22.5 mm height)
• Quarter size: 72x52x45 mm (with an option for 13,7 mm height)
• Square: 60x60x45 mm
   

Recommended settings:

• Layer height: 0.20-0.40 mm
• Nozzle size: 0.4-0.6 mm
• Avoid crossing perimeters: ON
• Infill: 15% Grid Pattern for the bottom plate
             0% For the vertical walls
• Parameters: 1 if nozzle size is 0.6 mm
                        1 or 2 if nozzle size is 0.4 mm

I recommend not infilling little gaps between walls unless it's the last few top layers. The gap fill and retractions will not only take a very long time, but also potentially degrade the print quality.

In case you have a Prusa MINI+, you can just use my generated gcode for a 0.6 mm nozzle.