Apple iPhone 6 Plus & 6s Plus & 7 Plus & 8 Plus case

Originally published here: Apple iPhone 6 Plus & 6s Plus & 7 Plus & 8 Plus case by tato_713 - Thingiverse

For the iPhone 6, 6s, 7, 8 and SE 2020, see this. This case was designed using as reference the iPhone 7 Plus, and a commercial case, that was compatible too with the iPhone 6 Plus, 6s Plus and 8 Plus. It was tested only with the first one, as it was the only one I had available to test, if this case does not fit correctly on any of the other phones, please, notify me and I will try to correct it, or remove its compatibility.

Some of the models are designed for rigid materials and others for flexible ones.The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

2021 is the year when most of country started the covid-19 vaccination; that's why I added a design with the 2021 with the "0" as a virus silhouette and the "1" as a syringe.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Tested on TPU the 7 Plus (thanks Marcelo Saiz).
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested on PLA and PETG with the6s Plus and 7 Plus.
• Aired: It is widely opened in the back so that the phone can dissipate the heat easily.
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.

I spend part of my time making these models, letting them available and free for everyone. If you want to support my work you can buy me a coffee in Ko-fi:



Si estás en Argentina podés invitarme a un cafecito:

Print Settings

Rafts:

No

Supports:

Yes

Resolution:

0.3

Infill:

Doesn't matter

Notes:

If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.