Weather Station. Raingauge, Anemometer and Windvane

Print files and Fusion 360 project to make a weather station. It will need an ESP8266 pro to log stuff. The pro is required as it has an external antenna.  It all clamps to a 25mm aluminium pole. 

The raingauge is a tipping bucket type - it took a few goes to get it right.

The full set of STL files are at https://github.com/wt29/Anemometer The .ino file for the 8266 is also there. I've configured mine to log into an AWS server running EmonCMS. Pro tip - reserved instances are your friend @ AWS!

Not your average project but a lot of fun. Also posted on Instructables https://www.instructables.com/Anemometer-3D-Printed-With-Internet-Logging/ where there is a bit more about how to build and configure.

All parts are printed in PETG for UV resistance. Some supports are needed around the electronics box, the cups for the anemometer and the vane on the wind vane.