Clippy Card Case

A while ago I looked for a card case to protect and store playing cards but I couldn't find anything that was exactly what I wanted. I wanted a fully 3D-printed playing card case with a reliable latch. I didn't want there to be a chance that the case would work it way open when bumped around. Since I didnt find anything that was quite what I wanted, I made my own and here it is. 

When navigating the files you will see that there are numbers after each model. These numbers refer to card length and width and deck height. So 926050 means 92mmx60mm maximum card size, and a deck height of 50mm.

If you want more sizes to be made available making more is super easy so let me know.

Printing:

• 3 perimeters
• 0.2mm layer height
• Supports on (maybe optional)
• Infill (15% or more)