Canon EFM 22mm f2 lens 43mm thread filter case (45.7mm X 5.5mm)

This is a two piece thread tight casing for the camera lens filters, it has space for a normal foam insert to be glued on both sides for a more secure fit, if foam is not used it may rattle a bit. Also there are two cutouts on the inside thread for easy access and removal. 

Filter measurements:

• diameter: 45.7mm
• height: 5.5mm

This specific filters have a 43mm thread to be used on a Canon 22mm f2 EF-M lens, however if your filter have the same measurement they should fit no issues.

While this model is not parametric it may work like it if scaled (haven't tried it). Still working on a true parametric model.

*when printing the lid only file be sure to rotate 180 deg the lid.

*this does not work work for CPL or variable ND filters since the adjustment ring add height (I’ll be uploading a model for those)

Included files:

• both lid and body for one print
• lid only file
• body only file

Printer parameters: 

• Model: Creality Ender 3S1
• Material: PLA
• Infill: Grid, 20%
• Print speed: 50 m/s
• Nozzle: 200 degC
• Bed: 60 degC
• Adhesion: skirt
• Supports: not needed