StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM

This model has the followinnf features:

• CPAP mount (2 heat inserts on StealthBurner + CPAP connector)
• Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC
• BTT KNOMI
• BTT CanBus (SB2209/2240)
• Standard or UFH hotend options
• Flat or HEX surface (with HEX pattern included)

Build Tips:

• Use heat inserts to mount CPAP connector to StealthBurner. Require 2 M3x8 bolts.
• To mount Nozzle Cam PCB you need to shorten (cut) 1 self-tapping screw (-5mm) included into 3DO Nozzle Kit

Assembly sequence:

• Mount nozzle camera PCB
• Mount KNOMI
• Connect nozzle camera FPC
• Mount CPAP connector
• Mount CAN bus SB0000 board
• Connect CPAP pipe