Ferrari SF23 front & rear wing for hat

I made this front and rear wing of the SF23 from Scuderia Ferrari to be mounted on a hat to wear at the Italian GP. You'll find 2 stls and 2 Lychee files since this was printed with resin. The stls are not supported while the Lychee files are, these are supports for RESIN printers. I don't know if these models can be printed on a fdm printer since the wings are quite slim, but obviously you can try.

To mount the wings on a hat I glued the front (I had to sand the gap a bit) and for the back I glued 1 clip and tied another one with strings.

Happy printing!

P.S. If you want to tip me 10 bucks buy this model here:

https://www.cgtrader.com/3d-print-models/fashion/other/ferrari-sf23-front-and-rear-wing-for-hat