Samsung Galaxy S5 g900 case

Originally published here: Samsung Galaxy S5 g900 case by tato_713 - Thingiverse

A rage-memes design for a rage-memes-era phone. Some of the models are designed for rigid materials and others for flexible ones.The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.

Por el día de la independencia argentina, el 9 de Julio, voy a actualizar algunas de las carcasas para celulares con una versión que haga alusión a la bandera argentina. Por la finura de algunas partes, este diseño sólo es posible en celulares relativamente grandes.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Not tested. 
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.
• Banded: It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.

I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me by donating to this PayPal account.

Print Settings

Rafts:

No

Supports:

Yes

Notes:

If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.