Microphone Anti Shock Mount (MASM)

This is my Microphone Anti Shock Mount (MASM) for the HyperX SoloCast.
the threads are 5/8'' for the Microphone side.

I lust left a 7mm hole in the Top Part and cutted the 3/8" thread later with a soldering iron insert. 
I also added a version with a 5/8" thread in the Top part of the Mount.  

The two parts Print with Supports, just make sure to set the support angle to 75% otherwise you will get supports over the threads which are a total mess so clean up!

In addition, you need two or 4 Rubber bands or (which I use) Hair ties.