What m3 screw length did you use to mount the cowl onto the mount? The stock ones seem to have trouble reaching the heat inserts. Or perhaps I should push the inserts a bit deeper.
Dragon Burner MGN12H/12C mount w/Beacon probe - *UPDATED*
Bit of a super niche model, but I needed it and no one had made one available yet.
62
392
0
5079
updated
June 13, 2024
Makes
Comments
will this work with endstop on the gantry and not toolhead?
Which dragon burner cowl part should I print?
@YaronShkop_1439382 you can print the plain one and it will work fine :) you don't need any other probe mounts or anything
@Bendandsend_757774 Thanks! Is this part connecting directly to the rail or should I use something in between?
View 4 more comments
Will it work with the "H" sensor model? Do I use the normal "X" carriage files to mount the toolhead? (Switchwire, MGN12C).
@YaronShkop_1439382 It should work just fine with the H model :) there doesn't seem to be any difference in mounting dimensions thankfully. I think MGN12C has 15mm distance between holes horizontally and MGN12H has 20mm distance. No issue whatsoever, I can adjust that for you if you like? Also, be very careful with your hotend dimensions, I may need to readjust the height of the beacon probe for you if you are willing to give it a go for me? I will make sure to add the files here for others with the same hot end :)
Also, yep! just use the normal X carriage files for mounting the tool head!
@Bendandsend_757774 wow thank you so much! It turns out I got MGN12H as well... I'm intend using Crazy NF hotend and if it won't be good, Revo Voron Hotend. Thank you again for your good will! (edited)
Does it work with the dragon hotend?
@OskarMller_988004 it certainly should do! But I may need you help with it, if that's okay? Every hotend has different dimensions, so I may need to lower or raise the beacon probe to ensure it measures correctly. All I need you to do is print the mount and attach the dragon burner toolhead and beacon probe, then measure the nozzle to the bottom of the beacon probe and let me know the measurement. We want the beacon probe to sit about 2mm above the nozzle for great measurements :)
Would you like to try that with me?
Is this for the normal or low profile probe?
@rveda_174909 I used the low profile, but I don't think the normal one will have any issues whatsoever :) actually, I'm pretty sure I had a normal profile knock off version installed on another machine using this adapter so it should be perfect for both!