Hueforge Turtle

A painting of a turtle created with Hueforge.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyLite Pro Army Green Transmission Distance: 0.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Army Green
At layer #11 (0.96mm) swap to Latte Brown
At layer #14 (1.2mm) swap to Ivory White for the rest.